A watchdog timer is a piece of hardware that can be used to automatically detect software anomalies and reset the processor if any occur. Generally speaking, a watchdog timer is based on a counter that counts down from some initial value to zero.
The embedded software selects the counter's initial value and periodically restarts it. If the counter ever reaches zero before the software restarts it, the software is presumed to be malfunctioning and the processor's reset signal is asserted. The processor (and the software it's running) will be restarted as if a human operator had cycled the power.
The embedded software selects the counter's initial value and periodically restarts it. If the counter ever reaches zero before the software restarts it, the software is presumed to be malfunctioning and the processor's reset signal is asserted. The processor (and the software it's running) will be restarted as if a human operator had cycled the power.
Introduction to watch dog timers
DS1232 WDT datasheet
(link updated 050107)
1 comment:
unable to open the ds1232 datasheet
Post a Comment